Three-phase active power calculator

Quick Answer

The three-phase active power calculator computes active power from the input values you provide.

Result Interpretation

The result shows Active power in W, computed directly from the entered inputs using the formula defined for this tool.

Worked Example

Verified calculation

Given:

line_voltage = 400
line_current = 10
power_factor = 1

Expected Result:

power = 6928.20323

The actual numerical result is computed by the Runtime engine using the persisted tool definition. The values shown here come from automatically validated test cases.

Formula / Method

active power = sqrt(3) * line-to-line voltage * line current * power factor

Active power.

Variables

Symbol	Label	Role	Description
line_voltage	Line-to-line voltage	INPUT	Line-to-line voltage
line_current	Line current	INPUT	Line current
power_factor	Power factor	INPUT	Power factor
power	Active power	OUTPUT	Active power

Calculation Steps

Enter the line-to-line voltage in V.
Enter the line current in A.
Enter the power factor in fraction.
Step 1: Compute active power.
Read the active power (W) from the results.

Frequently Asked Questions

What does this calculator calculate?

The Three-phase active power calculator estimates Active power based on the input parameters you provide

What units should I use for the inputs?

Enter each value in the units shown next to the input field: Line-to-line voltage (V), Line current (A), Power factor (fraction). Make sure all inputs use the specified units for consistent results

How does Line-to-line voltage affect the results?

The line-to-line voltage directly affects: Active power. Increasing or decreasing this value will change these output values according to the engineering formula

How should I interpret the calculated results?

The calculator provides the following outputs: active power in W. Results are computed from the input values using the defined calculation method. Always verify results against project-specific requirements and applicable standards

What assumptions does this calculator use?

This calculator uses automatically validated engineering formulas. Results are approximate and should be validated against site-specific conditions, applicable codes, and professional engineering judgment

When is this calculation useful?

The Three-phase active power calculator is useful during preliminary design, feasibility studies, and quick engineering checks in calculator projects. It helps engineers and designers estimate key parameters before proceeding with detailed analysis

Quick Answer

Calculator